A high performance solvent based coating for the underside or side panels of automotive vehicles, highway trailers, bus bodies, truck bodies, RVs, travel trailers etc. ValuGard VG-104 Undercoating provides a flexible and abrasion resistant coating for superior protection against corrosion caused by moisture, salt and alkalis. May be applied at 12 -15 mils wet for undercoating or up to 60 mils wet for added sound deadening and vibration dampening.
ValuGard VG-104 undercoating is an abrasive free material, formulated with specially refined petroleum asphalt, modified with special additives, and inert fillers. Blended with low aromatic content rule 75 mineral spirits and an odorant to achieve the best possible odor during application and drying. Consult SDS for safety measures.
ValuGard VG-104 undercoating is a thixotropic formula results in lower spray pressures for greater control with less overspray, back-spray and fogging. Excellent sprayability over a wide range of temperatures without heating. Super filtration and viscosity control allow smaller tip sizes and better coverage with decreased material consumption. Apply with conventional airless spray equipment.
Recommended Pumps Tips sizes
15:1 with 40-50 lbs. of air .017-.023 inches
Note:-Industrial applications may use larger volume pumps (Graco King or Bulldog)
-Product may also be applied using air atomized siphon or pressure pot systems
10 MILS WET 160 SQ. FT/CAL
12 MILS WET 135 SQ. FT/GAL
15 MILS WET 110 SQ. FT/GAL
VALUGARD VG-104 undercoating will skin in 1 hr., dry to firm touch in 4 hrs., and fully cure in 24 hrs. (Cure times may differ due to extreme temperatures)
| Color | Black |
| Flash Point | 144.4º degrees F Min. |
| Salt Spray ASTM B-117 @ 5% MgCl NACE TM-1 |
1500 hrs. min. 72 Cycles |
| SAE J2334 | 40 x 24 hour cycles |
Available in 12oz. aerosol cans, quart bottles, 5 gallon pails, 16 gallon kegs or 55 gallon drums
Exceeds Federal Specification TT-C-520 B
Exceeds Federal Specification FMVSS 302 (49cfr CH.V, 571 .302, Standard No. 302)
Dried material can be removed with mineral spirits. Take necessary precautions when handling combustible/flammable materials.